References

section epub:type=”bibliography”>

References

Ashby M.F. Materials selection in mechanical design. third ed. Elsevier; 2005.

Ashby M.F., Cebon D. Case studies in materials selection. Granta Design; 1996.

Ashby M.F., Johnson K. Materials and design—the art and science of material selection in product design. Elsevier; 2002.

ASM. Metals handbook. 2nd desktop edition ASM; 1999.

Bowden F.P., Tabor D. The friction and lubrication of solids, Part 1. Oxford University Press; 1950.

Bowden F.P., Tabor D. The friction and lubrication of solids, Part 2. Oxford University Press; 1965.

British Standards Institution. BS 7608: Code of practice for fatigue design and assessment of steel structures. BSI; 1993.

Broek D. The practical use of fracture mechanics. Kluwer; 1989.

Calladine C.R. Plasticity for engineers. Ellis Horwood; 1985.

Chapman P.F., Roberts F. Metal resources and energy. Butterworths; 1983.

Charles J.A., Crane F.A.A., Furness J.A.G. Selection and use of engineering materials. third ed. Butterworth-Heinemann; 1997.

Cottrell A.H. The mechanical properties of matter. Wiley; 1964.

Cottrell A.H. Environmental economics. Edward Arnold; 1977.

Crawford R.J. Plastics engineering. third ed. Butterworth-Heinemann; 1998.

Davies G. Materials for automotive bodies. Elsevier; 2004.

Fontana M.G. Corrosion engineering. third ed. McGraw-Hill; 1987.

Frost H.J., Ashby M.F. Deformation mechanism maps. Pergamon; 1982.

Gale W., Totemeier T. Smithells metals reference book. eighth ed. Elsevier; 2003.

Gordon J.E. The new science of strong materials, or why you don’t fall through the floor. second ed. Princeton University Press; 1988.

Gordon J.E. Structures: Or why things don’t fall down. Da Capo Press; 2003.

Hertzberg R.W. Deformation and fracture of engineering materials. fourth ed. Wiley; 1996.

Hull D. Introduction to dislocations. fourth ed. Butterworth-Heinemann; 2001.

Hull D., Clyne T.W. An introduction to composite materials. second ed. Cambridge University Press; 1996.

Hutchings I.M. Tribology: Functions and wear of engineering materials. Butterworth-Heinemann; 1992.

Kittel C. Introduction to solid state physics. seventh ed. Wiley; 1996.

Kubaschewski O., Hopkins B.E. Oxidation of metals and alloys. second ed. Butterworths; 1962.

Lawn B.R. Fracture of brittle solids. second ed. Cambridge University Press; 1993.

Lewis P.R., Reynolds K., Gagg C. Forensic materials engineering: Case studies. CRC Press; 2003.

Llewellyn D.T., Hudd R.C. Steels: Metallurgy and applications. third ed. Butterworth-Heinemann; 1998.

McEvily A.J. Metal failures. Wiley; 2002.

Murakami Y. Stress intensity factors handbook. Pergamon; 1987.

Polmear I.J. Light alloys. third ed. Butterworth-Heinemann; 1995.

Powell P.C., Ingen Housz A.J. Engineering with polymers. second ed. Stanley Thornes; 1998.

Schijve J. Fatigue of structures and materials. Kluwer; 2001.

Seymour R.B. Polymers for engineering applications. ASM International; 1987.

Shewmon P.G. Diffusion in solids. second ed. TMS Publishers; 1989.

Tabor D. Gases, liquids and solids. third ed Cambridge University Press; 1991.

Ward I.M. Mechanical properties of solid polymers. second ed. Wiley; 1983.

Young W.C., Budynas R.G. Roark’s formulas for stress and strain. seventh ed. McGraw-Hill; 2001.

Only gold members can continue reading. Log In or Register to continue

Aug 9, 2021 | Posted by in General Engineer | Comments Off on References
Premium Wordpress Themes by UFO Themes